Download > Accessories

Wall Mount and Desk Mount Kits

DTK1 Installation Guide

WMK2 Installation Guide

Wall Mount and Desk Mount Kits

DTK1	WMK2

WMK2 Installation Guide

I. Wall mount kit:

1. One PDA Shelf.

2. One ES301 Mounting Plate + One L Shape Bracket.

3. One EthIR Beam Mounting Plate.

II. Mounting Screws

1. Ten #6 1” screws with yellow plastic anchors

2. One #4 3/8 ” sheet metal screws

3. One #4 3/8” flat head screws.

III. Instructions

1. Join the EthIR Beam with its mounting plate with a #4 3/8” flat head screws (item 3). Poke a hole on EthIR Beam label with a pushpin can ease the installation.

2. Mount the PDA shelf on the wall with four #6 1” screws (item 1). Use an anchor when necessary.

3. Mount the EthIR Beam on the wall above the PDA shelf with two #6 1”. screws (item 1). Use anchor when necessary.

4. Mount the ES301 plate on the wall with four #6 1” screws (item 1). Use an anchor when necessary.

5. Hang the ES301 with the ES301 mounting plate then push it down, as you would on a wall mount telephone.

6. Place the L shape bracket on the top of ES301 and secure it with a #4 3/8 in. screw (item 2).

7. Connect the Mini-DIN cable between the ES301 and the Beam. Install conduit if required.

8. Connect an Ethernet cable to the ES301. Install conduit if required.

9. Connect the AC power adapter to the ES301.

#6 Screws + Plastic Anchor PDA shelf and Beam installation

#4 3/8” Screw#6 Screws + Plastic Anchor ES301 Installation

DTK1 Installation Guide

I. Desk mount kit:

1. One PDA Desk Top Holder.

2. One EthIR Beam Mounting Plate.

II. Mounting Screw

1. One #4 3/8” flat head screws.

2. Two #8-32 3/8” machine screws.

III. Instructions:

1. Join the EthIR Beam with its mounting plate with a #4 3/8” flat head screws (item 1). Poke a hole on EthIR Beam label with a pushpin can ease the installation.

2. Mount the EthIR Beam on the Desk Top Holder with two #8-32 3/8” in. screws (item 2). Use anchor when necessary.

3. Connect the Mini-DIN cable between the ES301 and the EthIR Beam.

4. Connect an Ethernet cable to the ES301.

5. Connect the AC power adapter to the ES301.

#8-32 3/8 machine Screws

PDA Desk Top Holder and Beam installation