EthIR LAN ESB608 - SyncHub for Enterprise Information Mobility

Providing enterprise handheld users a place to sync multiple devices has never been easier than with SyncHUB TM(ES608). With Clarinet’s SyncHUB, enterprise data is delivered directly to the employees handheld devices. Each SyncHUB allows four devices to simultaneously access the enterprise network through built-in Infrared ports.

These devices are placed in high-traffic areas, anywhere employees congregate. The SyncHUB utilizes patent-pend-ing Infrared Immersion Pockets (IIP) to allow handheld device - including Palm, Compaq, HP, Sony, Handspring, and Symbol - to sync and retrieve enterprise data. One Ethernet network jack and one power outlet will support up to four concurrent users.

Features:

• Network connectivity for handheld devices supporting the IrDA standard

• IEEE and IrDA standards compliant

• 10/100Base-T up-link

• Supports DHCP or static IP addressing

• Activity light indicates network access in progress

• Roomy infrared immersion pockets

• Easily table or wall-mounted

Benefits:

• High-speed access to the LAN and the Internet

• Eliminates the need for different LAN cards and cradles

• Plug and play set-up

• Eliminates platform independent interference while synchronizing multiple devices

• Easily moved, requiring only a power outlet and network jack

• Enables users to monitor sync progress

• Allows devices to sync regardless of infrared port location

SyncHUB Specifications:

Connections Up-link: 10/100Base-T Device link: IrDA 1.0 SIR (9.6/57.6/115kb), IrDA 1.1 FIR (4Mbps)

Network Management

SNMP agent (RFC 1157) MIB II (RFC 1213) Clarinet Systems specific MIB

Power Supply

100~240 VAC, 1A, 50/60Hz

Dimensions

Box: 18” x 9.37” x 25” (W x D x H)
PDA syncing pocket: -6.5” x 8.6” (W x H)
Weight 18 lbs

Environmental

Operating temperature: 5 to 35° C Storage temperature: -15 to +60° C Operating humidity: 20% to 80% noncondensing

Certifications

CE Mark FCC part 15 Class A

Safety

Compliant with UL standards

Ordering Information:

Model: Description:

ES608 SyncHUB

Clarinet Systems Inc.
44040 Fremont Blvd.
Fremont, CA 94538
Tel: 510-249-9660
Fax: 510-249-9661

www.clarinetsys.com

Northern America: (US) Tel: 919-968-0210 adawson@clarinetsys.com

Japan: (US) Tel: 702-612-2770 jcurry@clarinetsys.com

International: (US) Tel: 510-249-9660 ext 302 jeansheu@clarinetsys.com

Note: Specifications are subject to change without notice. All brand names and trademarks are the exclusive property of the manufacturers.

How to use PDA positioning ledges for the ES608 SyncHub from Clarinet Systems

Your new ES608 SyncHub comes with several hard rubber “ledges” which can be used to position PDAs with non-standard, lower-power IR ports closer to the top of the SyncHub’s pocket to provide a more reliable line-of-sight connection.

Also, some PDAs may have an IR port on the side, bottom, or corner of the device, and ledges can be used to to more effectively hold and “aim” the PDA’s IR port toward the top of the sync pocket where the SyncHub’s IR port “eye” – the EthIR Beam - is located.

Position the rubber ledge on the bottom of the SyncHub pocket as shown to the right. Remove the covering on the back of the ledge to use the adhesive for a more secure grip.

Below are several examples showing PDAs with IR ports located on the top and the side of the devices mounted in the sync pocket of the SyncHub using the positioning ledges and installed diagonally.